What Is Honing?- Definition, Process, and Tools

What Is Honing?

Honing is an abrasive machining process that produces a precision surface on a metal workpiece by scrubbing an abrasive grinding stone or grinding wheel against it along a controlled path. Honing is primarily used to improve the geometric form of a surface, but can also improve the surface finish.

Typical applications are the finishing of cylinders for internal combustion engines, air-bearing spindles, and gears. There are many types of hones, but all consist of one or more abrasive stones that are held under pressure against the surface they are working on.

Other similar processes are lapping and superfinishing.

Definition of Honing

Honing defines as the act or process of sharpening something on a hone or whetstone, The precision alignment of the cutting machine’s knife is not affected by the honing of the sharp edge.

The honing process provides the final sizing and creates the desired finish pattern on the interior of tubing or cylinder bores. Finishing is accomplished by expanding abrasive stones of suitable grit and grade against the work surface.

The stones are rotated and reciprocated in the part with hone abrasive under controlled pressure. Combining rotation and reciprocation produces a cross-hatch pattern in the surface of the part being honed.

honing

Why We Need Honing Process?

Honing machines are metal abrading tools and the honing process utilizing hard tooling or honing stones and perishable abrasives stones for the correction of

  • Diameter
  • Shape
  • Surface finish
  • Positional tolerances of bores

The honing process was developed to allow for the perfection of bore geometry, size control, final surface finish, and surface structuring. Honing process that can provide the final sizing and creates the desired finish pattern on the interior of tubing or cylinder bores.

Finishing is accomplished by expanding abrasive stones of suitable grit and grade against the work surface. The stones are rotated and reciprocated in the part with hone abrasive under controlled pressure. Combining rotation and reciprocation produces a cross-hatch pattern in the surface of the part being honed.

Process Mechanics

Since honing stones look similar to grinding wheels, it is tempting to think of honing as a form of low-stock removal grinding. Instead, it is better to think of it as a self-truing grinding process.

In grinding, the wheel follows a simple path. For example, in plunge grinding a shaft, the wheel moves in towards the axis of the part, grinds it, and then moves back out. Since each slice of the wheel repeatedly contacts the same slice of the workpiece, any inaccuracies in the geometric shape of the grinding wheel will be transferred onto the part.

Therefore, the accuracy of the finished workpiece geometry is limited to the accuracy of the truing dresser. The accuracy becomes even worse as the grinding wheel wears, so truing must occur periodically to reshape it.

The limitation on geometric accuracy is overcome in honing because the honing stone follows a complex path. In-bore honing, for example, the stone moves along two paths simultaneously. The stones are pressed radially outward to enlarge the hole while they simultaneously oscillate axially.

Due to the oscillation, each slice of the honing stones touches a large area of the workpiece. Therefore, imperfections in the honing stone’s profile cannot transfer to the bore. Instead, both the bore and the honing stones conform to the average shape of the honing stones’ motion, which in the case of bore honing is a cylinder.

This averaging effect occurs in all honing processes; both the workpiece and stones erode until they conform to the average shape of the stones’ cutting surface. Since the honing stones tend to erode towards a desired geometric shape, there is no need to true them.

As a result of the averaging effect, the accuracy of a honed component often exceeds the accuracy of the machine tool that created it.

The path of the stone is not the only difference between grinding and honing machines, they also differ in the stiffness of their construction. Honing machines are much more compliant than grinders. The purpose of grinding is to achieve a tight size tolerance.

To do this, the grinding wheel must be moved to an exact position relative to the workpiece. Therefore, a grinding machine must be very stiff and its axes must move with very high precision.

A honing machine is relatively inaccurate and imperfect. Instead of relying on the accuracy of the machine tool, it relies on the averaging effect between the stone and the workpiece. Compliance is a requirement of a honing machine that is necessary for the averaging effect to occur.

This leads to an obvious difference between the two machines: in a grinder, the stone is rigidly attached to a slide, while in honing the stone is actuated with pneumatic or hydraulic pressure.

High-precision workpieces are usually ground and then honed. Grinding determines the size and honing improves the shape.

The difference between honing and grinding is always the same. Some grinders have complex movements and are self-truing, and some honing machines are equipped with in-process gaging for size control. Many through-feed grinding operations rely on the same averaging effect as honing.

Honing tools

Honing uses a special tool, called a honing stone or a hone, to achieve a precision surface. The hone is composed of abrasive grains that are bound together with an adhesive. Generally, honing grains are irregularly shaped and about 10 to 50 micrometers in diameter (300 to 1500 mesh grit). Smaller grain sizes produce a smoother surface on the workpiece.

The purpose of the honing tool is to transmit the power generated by the machine to the workpiece. Honing will correct the bore for taper, size, finish, and straightness, but cannot normally correct axial alignment or location.

The tool consists of a spindle nose adaptor, a drive shaft, and a honed body. The hone body contains a cone attached to a push rod. See the drawing of a typical hone tool on the next page

The pushrod, inside the drive shaft, is moved up or down in the honed body by a motor or hydraulic cylinder. The actuator is located in the head. As the cone moves down, it pushes the expansion plates outward, expanding the stones.

The abrasive stones are used to remove the stock material from the workpiece. The garter springs are used to keep the stones in the tool and to collapse the stones when the tool is removed from the bore.

The hone tools may use super-abrasives or vitrified stones for rough honing, semi-finishing, and final honing.  Peak honing typically requires only the roughing operation. Plateau honing (putting a “plateau” on top) requires fine stones to remove the peaks.  Some hone tools have both roughers and finishers in a single tool.

Hone Guides

The hone guides are part of the honing tool. They are used to protect the hone stones when entering or leaving the bore and prevent the metal of the honing tool from contacting the bore surface.

The guides must be checked frequently for wear or pick up of foreign material. Honing stones are typically collapsed below the size of the guides when withdrawing to protect the stones and the hone guide bushing.

Hone Guide Bushing

The hone guide bushing is mounted to a fixed bracket on the front of the column. The function of the hone guide bushing. is to guide hone tool into the center of the bore. The bushing is typically made from hardened steel or carbide. 

Carbide is used when the hone guide bushing is also a “collapse bushing”. These are used to force the stones back flush with the tool body when the tooling is too small to have garter springs.

Adjustable Cone

When honing blind bores, an adjustable cone may be used to expand the bottom of the stones to account for wear and to keep the bottom at the size. Blind bore over travel shown above. Notice the stones cannot travel past the bottom as in through bores.

This will cause uneven stone wear and a taper at the bottom of the part. The problem can be helped by the use of an adjustable cone and by the use of dwell at the bottom.

Single Pass Honing Tools

The honing tool may consist of a diamond abrasive boring bar which is constructed from an expandable soft cast iron sleeve permanently coated with 100/120 grit of natural diamond abrasive or it may be a sintered sleeve that has abrasive embedded in it.

The tool is expandable, to compensate for diamond sleeve wear. The arbor contains passages for coolant flow to the grooves in the sleeve.  The honing tool passes through the bore once and is withdrawn.

This machine uses a floating type hone tool that self-aligns with the existing bore. The tool is designed for honing open bores which have been generated by the previous machining. operation. The tool can correct a bore that is run-out, tapered, and out-of-round conditions. The tool produces straight, round, un-tapered holes in one downstroke.

The hone guide bracket and bushings are mounted to a fixed bracket mounted to the front of the column. The function of the hone guide bracket is to guide the honing tool into the bore. The bushing is machined to allow coolant to flow to the single-pass hone tool.

Advantages of Honing process

  • Less complex or low-cost fixtures.
  • It is highly accurate.
  • It can be used for both long and short bores.
  • It maintains the original bore centerline.
  • Any material can be finished regardless of its hardness.
  • The workpiece need not be rotated by power, there are no chucks, faceplates, or rotating tables needed, so there are no chucking or locating errors.
  • The hone is driven from a central shaft, so bending of the shaft cannot cause tapered holes as it does when boring.
  • The result is a truly round hole, with no taper or high or low spots, provided that the previous operations left enough stock so that the hone can clean up all the irregularities.
  • Honing uses a large contact area at a slow speed compared with grinding or fine boring, which uses a small contact area at high speed. Because of the combined rotating and reciprocating motion used, a crosshatched pattern is created which is excellent for holding lubrication. Diameters with 0.001 to 0.0001 inch and closer accuracies can be honed by using diamond stones similar to diamond wheels.

Limitations Of Honing Process

  • Honing is thought of as a slow process. However, new machines and stones have shortened hone times considerably.
  • Horizontal honing may create oval holes unless the work is rotated or supported. If the workpiece is thin, even hand pressure may cause a slightly oval hole.

Application of Honing Process

  • Finishing automobile crankshafts journals
  • Finishing round holes
  • Finishing hollow cylindrical parts
  • Finishing Engine cylinder, bearings, gun barrels, ring gauges, shafts and flange faces, piston pin, automobile crankshaft journals etc.
  • Gear Hobbling

FAQs

What are the basics of honing?

Not to be confused with lapping, honing is a machining process that involves the use of an abrasive material to grind down a workpiece’s surface. It’s performed in conjunction with a stone, known as a honing stone, to manipulate the shape and texture of a workpiece’s surface.

What is the honing technique?

Honing is an abrasive machining process that produces a precision surface on a metal workpiece by scrubbing an abrasive grinding stone or grinding wheel against it along a controlled path. Honing is primarily used to improve the geometric form of a surface, but can also improve the surface finish.

Is honing the same as grinding?

Honing is primarily used for achieving a smoother, more precise surface finish without significant material removal. Grinding is an aggressive material removal process. It removes relatively large amounts of material quickly and is suitable for tasks like stock removal and shaping.

What is honing in drilling?

The honing process in manufacturing provides the final size and desired pattern on the inner diameter of a metal tube and a metal cylinder bore. Metal and surface finishing is often developed by properly applying pressure on diamond abrasive stones that have the right grit and grade against the work surface.

What are the disadvantages of honing?

The disadvantages of honing:
1. It maybe generate a slightly ovel hole if this is a very thin workpieces.
2. Oval holes may also occur as a result of honing horizontally if the workpiece is not supported.
3. The whole process of honing takes a longer time.

Do you hone before or after sharpening?

When you think you need to sharpen, you probably just need to hone it on a steel. I would do that first,” says Sergio Menchaca of Texas Sage Forge. “When you sharpen, you’re actually removing some of that steel. Honing just realigns it.